Zero Pore 10-Peptide Serum 2.0
Medicube Zero Pore 10-Peptide Serum 2.0 is a Korean-market serum built around Niacinamide, formulated in Korea and sold here in its original Korean-market formula rather than a US-shelf reformulation.
No reviews yet37ml
$54.03 per 100 ml
- Korean-market formula
- Ships from California or direct from Korea
- Korean barcode and batch code intact
- Suited to
- normal skincombination skindry skin
- Helps with
- loss of bounce and firmnessvisible pores and rough texturegeneral day-to-day maintenance as part of a full routine
Sold out.
Tell us where to send it
One email, the moment this exact unit is back in stock. Not a newsletter and not a sequence, and your address comes off the list the second it is sent.
- 30-day returns
- Free US shipping on orders of $100 or more
- Tracked delivery to your door
How it works
Medicube Zero Pore 10-Peptide Serum 2.0 is a serum built for the treatment step right after toner. Its ingredient list leads with Niacinamide, Salicylic Acid, and Allantoin, so the formula's stated purpose lines up with what actually sits near the top of that list rather than with a single marketing ingredient buried further down. Niacinamide does the most work here as a tone and texture, and the remaining actives round out the texture and finish rather than compete for attention. Placed as the treatment step right after toner, it is meant to be used AM/PM rather than swapped freely between steps. Because this is the Korean-market version of the Zero Pore 10-Peptide Serum 2.0 line rather than a US-reformulated variant, the texture and finish match what Medicube sells through Korean retail.
Key benefits
- Built around Niacinamide, positioned for tone and texture.
- Built around Salicylic Acid, positioned for pore care.
- Built around Allantoin, positioned for comfort.
- Formulated as a serum for the treatment step right after toner.
- The Korean-market Medicube formula for Zero Pore 10-Peptide Serum 2.0, matching what Medicube sells in Korea rather than a US-reformulated line.
Inside the formula
Inside the formula
Medicube Zero Pore 10-Peptide Serum 2.0
What does the Zero Pore 10-Peptide Serum 2.0 actually contain?
Its ingredient list is led by Niacinamide, with the rest of the formula built to support that active rather than compete with it. We list the ingredients in the order the manufacturer prints them, so the ones near the top of the panel are doing the most work in the formula.
How do I use the Zero Pore 10-Peptide Serum 2.0?
Use this serum as the treatment step right after toner. To apply, smooth or press onto cleansed, toned skin and follow with moisturizer. Keep it to AM/PM unless the packaging states otherwise, and give the rest of the routine a moment to settle before layering the next step. Give it a full bottle or box before judging the result, since most Korean routines are built for steady use rather than a single application.
Is the Zero Pore 10-Peptide Serum 2.0 the same formula sold in Korea, or a US version?
This Zero Pore 10-Peptide Serum 2.0 is the Korean-market formula, not a version reformulated for US shelves. It arrives with its original Korean-market barcode and batch code intact so the formula can be checked against the box on arrival.
Can I use the Zero Pore 10-Peptide Serum 2.0 with other actives in my routine?
Yes, as long as it is used in its own step, the treatment step right after toner, and not layered on top of a product doing the same job. Introduce any new step gradually over the first week or two and keep an eye on how the skin responds before adding a second new active alongside it.
Who is the Zero Pore 10-Peptide Serum 2.0 suited for?
It suits most skin types looking for treatment step right after toner rather than a single acute problem. It comes in a 37ml format. Anyone with a known sensitivity to a specific ingredient should check the full ingredient panel on this page before buying.
Not on the ingredient list below: fragrance or parfum, denatured or SD alcohol, essential oils, parabens, sulfate surfactants, mineral oil or petrolatum and added color.
Full INCI (60): Water (Aqua), Methylpropanediol, Glycerin, Propanediol, Niacinamide, Tromethamine, 1,2-Hexanediol, Polyglycerin-3, Lactic Acid, Dimethicone, Gluconolactone, Salicylic Acid, Hydroxyethylcellulose, Sodium Polyacryloyldimethyl Taurate, Lecithin, C12-14 Alketh-12, Allantoin, Citric Acid, Ethylhexylglycerin, Adenosine, Butylene Glycol, Dextrin, Glycolic Acid, Sodium Citrate, Gardenia Florida Fruit Extract, Trisodium Phosphate, Capryloyl Salicylic Acid, Myosotis Sylvatica Flower/Leaf/Stem Extract, Hemerocallis Fulva Flower Extract, Stellaria Media (Chickweed) Extract, Lactobacillus Ferment Lysate, Taraxacum Officinale (Dandelion) Leaf Extract, Lactobacillus Ferment, Caprylic/Capric Triglyceride, Sorbitan Laurate, Cetyl Palmitate, Sorbitan Stearate, Polysorbate 80, Caprylyl Glycol, Acetyl Glutamine, Acetyl Dipeptide-1 Cetyl Ester, Bacillus/Soybean Ferment Extract, Sodium Benzoate, Ulmus Davidiana Root Extract, Pueraria Lobata Root Extract, Pinus Palustris Leaf Extract, Oenothera Biennis (Evening Primrose) Flower Extract, Hydrogenated Lecithin, Palmitoyl Tripeptide-5, Acetyl Hexapeptide-1, Tocopherol, Acetyl Octapeptide-3, Sodium Hyaluronate, Palmitoyl Tetrapeptide-10, Folic Acid, Copper Tripeptide-1, Oligopeptide-3, Oligopeptide-2, Oligopeptide-1, Hexapeptide-11
Ingredient list read from medicube.us on 10 September 2026.
60 of 60 explained
- Water (Aqua) solvent
- Water is the base almost every serum, toner and cream is built on. It dissolves the water-loving ingredients and sets how light the finished texture feels. On an INCI list it is usually first, which only means it is the largest single ingredient by weight.
- Methylpropanediol humectant
- Methylpropanediol is a small glycol used to hydrate and to help water-soluble actives penetrate the outer layer of skin more evenly. It leaves almost no tack, which suits watery textures.
- Glycerin humectant
- Glycerin is the most used humectant in skincare. It draws water into the outer layer of skin and holds it there, and it is one of the very few ingredients whose hydrating effect is settled science rather than marketing. Higher amounts feel tacky, which is why it is usually blended.
- Propanediol humectant
- Propanediol is a plant-derived glycol used in place of propylene glycol. It hydrates, carries actives into solution, and gives a lighter, less sticky slip than glycerin at the same strength.
- Niacinamide active
- Niacinamide is vitamin B3, and it is the most studied active in Korean formulation. It is used at roughly 2 to 5 percent for the look of uneven tone and visible pores, and it is water soluble, stable and comfortable beside almost every other active, which is why it turns up in so many lists.
- Tromethamine pH adjuster
- Tromethamine neutralises acidic thickeners such as carbomer so they gel, and holds a formula near skin-friendly pH. It is used at a fraction of a percent.
- 1,2-Hexanediol humectant
- 1,2-Hexanediol is a glycol used for two reasons: it holds water like glycerin, and it makes a formula harder for microbes to live in, so less traditional preservative is needed. Korean formulas use it heavily for that second reason.
- Polyglycerin-3 humectant
- Polyglycerin-3 is a short chain of glycerin units used as a gentler, less sticky humectant. It also helps oils and water stay blended.
- Lactic Acid exfoliant
- Lactic Acid is a larger AHA than glycolic, so it works nearer the surface and is easier on skin, and it is a humectant as well as an exfoliant. It is the AHA of choice for dry skin.
- Dimethicone silicone
- Dimethicone is the most used cosmetic silicone. It forms a breathable film that smooths the surface, slows water leaving skin, and gives the slip that makes a primer or cream feel silky. It is inert and does not penetrate.
- Gluconolactone exfoliant
- Gluconolactone is a PHA, the gentlest exfoliant class. Its molecule is too large to penetrate quickly, so it smooths the surface without the sting of an AHA, and it is a humectant at the same time.
- Salicylic Acid exfoliant
- Salicylic Acid is a BHA, and the only common exfoliant that is oil soluble, so it can work inside a pore rather than only on the surface. It loosens the dead cells that block pores and is used for the look of congested, oily skin.
48 more explained
- Hydroxyethylcellulose thickener
- Hydroxyethylcellulose is a cellulose thickener that builds a clear, smooth gel and holds the rest of the formula in suspension.
- Sodium Polyacryloyldimethyl Taurate thickener
- Sodium Polyacryloyldimethyl Taurate is a polymer thickener that holds a gel stable even with a lot of salt or acid in the formula.
- Lecithin emulsifier
- Lecithin is a soy or sunflower-derived phospholipid, the same class of molecule cell membranes are built from. It emulsifies oil into water and is the basis of the liposomes formulators use to carry actives.
- C12-14 Alketh-12 emulsifier
- C12-14 Alketh-12 is a solubiliser used to keep oils and fragrance dissolved in a water-based formula.
- Allantoin active
- Allantoin is a comfrey-derived compound used to condition skin and soften the outer layer so it feels smoother. It is one of the standard additions to a formula built for easily irritated skin.
- Citric Acid pH adjuster
- Citric Acid is used in tiny amounts to bring a formula to the pH its actives need, not as an exfoliant at that level. It is an AHA, so at much higher concentrations it can also exfoliate.
- Ethylhexylglycerin preservative booster
- Ethylhexylglycerin softens skin and boosts a preservative system, which is why it is nearly always sitting beside phenoxyethanol or 1,2-hexanediol. It also cuts down the odour bacteria produce, so it turns up in deodorising products.
- Adenosine active
- Adenosine is a nucleoside that Korea's own cosmetic authority recognises as a wrinkle-care functional ingredient, which is why it appears on so many Korean lists at a low level. It is used for the look of fine lines and is stable and well tolerated.
- Butylene Glycol humectant
- Butylene Glycol is a small glycol that does two jobs at once: it holds water in the top layer of skin and it dissolves plant extracts and actives that plain water cannot. It also thins a formula, which is why watery Korean essences lean on it.
- Dextrin thickener
- Dextrin is a starch fragment used to thicken and to give a formula a light, powdery finish. It is also a common carrier for powdered extracts.
- Glycolic Acid exfoliant
- Glycolic Acid is the smallest AHA, which is why it is also the most penetrating and the most likely to sting. It loosens the bonds between dead surface cells and is used for the look of dullness and rough texture.
- Sodium Citrate pH adjuster
- Sodium Citrate is the salt of citric acid, used as a buffer: it holds a formula at a steady pH rather than pushing it in one direction. It is also a mild chelator.
- Gardenia Florida Fruit Extract plant extract
- Gardenia Fruit Extract is the traditional East Asian yellow dye plant. In skincare it is used as an antioxidant extract, and it can tint a formula.
- Trisodium Phosphate pH adjuster
- Trisodium Phosphate is an alkaline phosphate salt used to raise and hold pH. It also softens hard water so a cleanser foams properly.
- Capryloyl Salicylic Acid exfoliant
- Capryloyl Salicylic Acid is salicylic acid with a fatty tail, sometimes sold as LHA. It stays nearer the surface than salicylic acid and works at a higher pH, so it exfoliates more evenly and more gently.
- Myosotis Sylvatica Flower/Leaf/Stem Extract plant extract
- Forget-me-not extract, taken from the whole plant above ground. It is used as a gentle conditioning botanical.
- Hemerocallis Fulva Flower Extract plant extract
- Orange daylily flower extract, from an edible flower in Korean cooking. It is used as a conditioning floral extract.
- Stellaria Media (Chickweed) Extract plant extract
- Chickweed extract, a common garden herb used for the look of reddened, easily bothered skin. It carries saponins and mucilage.
- Lactobacillus Ferment Lysate ferment
- Lactobacillus Ferment Lysate is the ferment with the bacterial cells broken open, so their contents are in the formula too. It is a conditioning ferment used in barrier-focused products.
- Taraxacum Officinale (Dandelion) Leaf Extract plant extract
- Dandelion leaf extract, carrying flavonoids, minerals and plant acids. It is used as a conditioning antioxidant extract.
- Lactobacillus Ferment ferment
- Lactobacillus Ferment is the liquid left after lactobacillus bacteria have fermented a plant or milk substrate. It carries the small molecules the fermentation produced, including lactic acid and amino acids, and is used for the look of dull, uneven skin.
- Caprylic/Capric Triglyceride emollient
- Caprylic/Capric Triglyceride is the light fraction of coconut oil, with the heavy parts removed. It is the workhorse emollient of modern formulas: it softens skin, dissolves oil-soluble actives and absorbs without the greasy weight of a whole plant oil.
- Sorbitan Laurate emulsifier
- Sorbitan Laurate is a light emulsifier and solubiliser, used to keep small amounts of oil or fragrance dissolved in a watery formula.
- Cetyl Palmitate emollient
- Cetyl Palmitate is a wax ester, the same kind of molecule that makes up much of spermaceti and jojoba. It thickens the oil phase and leaves a smooth, non-greasy film.
- Sorbitan Stearate emulsifier
- Sorbitan Stearate is a mild emulsifier and thickener used to hold oil and water together in creams.
- Polysorbate 80 emulsifier
- Polysorbate 80 is an emulsifier and solubiliser used to keep oils, fragrance and oil-soluble actives dissolved in water.
- Caprylyl Glycol preservative booster
- Caprylyl Glycol is a glycol that conditions skin and, more importantly, strengthens a preservative system so less of the traditional preservative is needed. It appears in most modern formulas built without parabens.
- Acetyl Glutamine amino acid
- Glutamine with an acetyl group added, which makes it more stable in water. It is used as a conditioning amino acid.
- Acetyl Dipeptide-1 Cetyl Ester peptide
- Acetyl Dipeptide-1 Cetyl Ester is a two-amino-acid peptide with a fatty cetyl tail attached, which lets it sit in the oil phase of a formula rather than only the water phase.
- Bacillus/Soybean Ferment Extract ferment
- This is soybean fermented by Bacillus, the process behind Korean cheonggukjang. Fermentation cuts the soy proteins into smaller pieces and produces polyglutamic acid, a strong humectant.
- Sodium Benzoate preservative
- Sodium Benzoate is a mild preservative that works only in acidic formulas. It is usually paired with potassium sorbate, and the pair is the standard choice where a brand wants no phenoxyethanol.
- Ulmus Davidiana Root Extract plant extract
- Ulmus Davidiana is Japanese elm, whose inner bark yields a naturally slippery mucilage. Korean formulas use the root extract for that cushioned feel and for the look of reactive skin.
- Pueraria Lobata Root Extract plant extract
- Pueraria Lobata is kudzu. Its root extract carries isoflavones, plant compounds structurally similar to oestrogen, and Korean formulas use it for the look of thinning, less resilient skin.
- Pinus Palustris Leaf Extract plant extract
- Pinus Palustris is longleaf pine. Its needle extract carries plant antioxidants and appears in Korean formulas alongside other conifer extracts.
- Oenothera Biennis (Evening Primrose) Flower Extract plant extract
- Evening Primrose Flower Extract is used as a conditioning plant extract. The seed oil of the same plant is the better known part, and it is a different ingredient.
- Hydrogenated Lecithin emulsifier
- Hydrogenated Lecithin is lecithin with its unsaturated bonds filled in, which makes it far more stable. It emulsifies and is the standard shell for the liposomes that carry actives into the outer layer of skin.
- Palmitoyl Tripeptide-5 peptide
- Palmitoyl Tripeptide-5 is a fatted three-amino-acid peptide used for the look of firmness and fine lines. The palmitoyl tail is what lets it cross an oily surface.
- Acetyl Hexapeptide-1 peptide
- Acetyl Hexapeptide-1 is a six-amino-acid peptide used for the look of even tone. It is one of the few peptides aimed at pigment rather than at lines.
- Tocopherol antioxidant
- Tocopherol is vitamin E. It is an oil-soluble antioxidant that protects the oils in a formula from going rancid and works on skin as an emollient, and it is regularly paired with vitamin C because each keeps the other going for longer.
- Acetyl Octapeptide-3 peptide
- Acetyl Octapeptide-3 is an eight-amino-acid peptide used for the look of expression lines. It is usually paired with acetyl hexapeptide-8 rather than used alone.
- Sodium Hyaluronate humectant
- Sodium Hyaluronate is the salt of hyaluronic acid, and it is what most products labelled hyaluronic actually contain. The salt dissolves more readily and the molecule is smaller, so it sits in the outer layer of skin rather than only on top of it.
- Palmitoyl Tetrapeptide-10 peptide
- A four-amino-acid peptide carrying a fatty palmitoyl tail. It is used as a conditioning peptide, usually beside other palmitoyl peptides.
- Folic Acid vitamin
- Folic Acid is vitamin B9. It is used in a formula as a conditioning vitamin, usually as part of a B-complex blend.
- Copper Tripeptide-1 peptide
- Copper Tripeptide-1 is three amino acids bound to a copper ion, and the classic firming peptide in cosmetic chemistry. It is blue in solution, which is often why a serum carrying it is tinted, and it is used for the look of firmness and fine lines.
- Oligopeptide-3 peptide
- Oligopeptide-3 is another short synthetic peptide sequence. Numbered oligopeptides that sit next to each other on a label are separate sequences, not doses of one ingredient.
- Oligopeptide-2 peptide
- Oligopeptide-2 is a short synthetic peptide, water soluble like most of the unmodified oligopeptides. It is supplied as one component of a blend.
- Oligopeptide-1 peptide
- Oligopeptide-1 is a short synthetic peptide. Oligo means the chain is short without the name fixing its length, which is why oligopeptides appear in blends where several sequences work together.
- Hexapeptide-11 peptide
- Hexapeptide-11 is a yeast-derived six-amino-acid peptide used for the look of resilience and firmness.
- Market
- Korean market, the version sold in Korea
- EAN (barcode)
- 8800256118892
- Made in
- Republic of Korea
- Volume
- 37ml
- Category
- Serum & Ampoule / Pore-refining serum
- Actives
- Adenosine, Allantoin, Glycolic Acid, Lactic Acid, Niacinamide, Peptides, Salicylic Acid, Sodium Hyaluronate
- Ships from
- California or Korea
Orders ship from California or direct from Korea with tracked delivery to your door, and both routes carry the same Korean-market release. Shipping is free on orders of $100 or more. Returns are accepted for 30 days, by mail.
We split shipments free, so one out-of-stock item never holds up the rest of your order.
Where this unit came from
- 1Seoul
Bought as Korean-market stock - 2Barcode
Listed against the Korean barcode on its box - 3California or Korea
Ships to you from either, as the same Korean-market release
We stock the version of a formula that is sold in Korea, not the release a brand prepares for another market under the same name. The barcode in the specification above is the Korean-market one and it is printed on the box you receive.
Every unit keeps its original barcode and batch code intact, so the unit in your hands can be checked against the brand’s own records.
Every order ships from California or direct from Korea, and returns run for 30 days.
Every claim on this page traces to the unit in the box, the barcode, the batch code and the price you can read for yourself.
How to use
- Use it after toner or a pad, before moisturizer, morning and night on skin that is still damp.
- Three or four drops for the face, with an extra pass across the nose and chin.
- Press it in and give it a minute before the cream goes over the top of it.
- Twice a day. Do not use it on the T-zone alone, because it is built as a whole-face step.
Worth knowing
- Patch test on the inner arm before the first full-face application, especially on skin that reacts easily to new products.
- Stop use and rinse off if stinging, burning, or new redness shows up rather than pushing through discomfort.
Reviews
No reviews yet. Tell us how much you love the product!
Write a reviewWrite a review
Medicube Zero Pore 10-Peptide Serum 2.0
How it felt, how your skin took it, what you layer it with. Straight answers help the next person choose.
We’re on gram!
Creators trying on authentic Korean skincare routines and products from us.
Rating a shelf of Dr. Althea products one by one.
Jasmine Loo · YouTube
Two hydrating serums side by side, IUNIK and Dr. Althea.
Kristin · YouTube
A walk through the Dr. Althea serum lineup and who each one suits.
auraofmahmuda · YouTube
A blunt first take on the Dr. Althea range.
Lexi Chang · YouTube
A first look at the viral 345 Relief Cream before buying.
Shelley Nayak · YouTube
A first try of the Dr. Althea serum on camera.
Hannah Ziad · YouTube
Medicube, Korean-market original
Medicube's Korean-market serum led by Niacinamide, the same formula sold in Korea.
Verify your unit when it arrives
Verify your unit when it arrives
Korean-market stock with the original barcode and batch code intact, exactly as it left Korea.
Medicube prints a QR code on the inner box. Scan it with your phone camera and it resolves to the brand’s own verification site.
Verify on medicubeverify.com →Source: Medicube packaging and verification site
On the unit itself
- The Korean-market barcode, unaltered from the retail package.
- The manufacturer’s batch code, exactly as the maker printed it.
정품Genuine article, Korean-market stock
What professionals say
What professionals say
What skin-care professionals say about skin care, quoted from the medical sources linked beside each.
Your skin barrier is basically your outer layer of the skin.
Melissa Piliang, MDDermatologist, Cleveland Clinic Pretty much every step of a Korean skin care routine is going to have some component of hydration.
Alok Vij, MDDermatologist, Cleveland Clinic
Ask an AI assistant about this product
Ask an AI assistant about this product
Opens ChatGPT, Perplexity or Claude in a new tab with the question prefilled. Claude asks you to sign in first.