What does 'custard-like' actually feel like?

It describes the set rather than the wear: the blush stays soft and slightly bouncy on the skin instead of drying flat like a powder or staying fully wet like a stain.

How long do I have to blend it before it sets?

Longer than most cream blushes, which is the point of the custard-like texture, but blending sooner rather than later still gives the most even result. This is general guidance rather than a fixed rule, so adjust it based on how your own skin or the product itself responds.

Fingers work best. Finger heat helps the custard-like texture blend evenly, where a brush can drag before the product has had a chance to set. This is general guidance rather than a fixed rule, so adjust it based on how your own skin or the product itself responds.

Is this the same formula sold in Korea, or a version made for the US market?

This is TIRTIR's Korean-market formula, sourced and shipped with its original Korean-market packaging and batch coding rather than a separate US-reformulated version. Korean Pharmacy stocks the exact SKU sold through Korean retail rather than a substitute built for US shelves, which is the point of buying from a specialist rather than a general beauty retailer.

How should I store this to keep it in good condition?

Keep the cap or compact closed between uses and store it away from direct sunlight and heat, the same way you would any cosmetic. A cool, dry spot such as a drawer or cabinet keeps the texture and finish consistent for longer than leaving it exposed on a warm windowsill or in a hot car.

TIRTIR

Custard-Like Liquid Blush 9g (6color)

No reviews yet

color

$27.50

9 g

$30.56 per 10 g

Korean-market formula
Ships from California or direct from Korea
Korean barcode and batch code intact

Suited to: All skin types, since the formula sits only on lips or cheeksDry or flaky lips that need a balm base along with colourFair to deep skin tones depending on the shade chosen

Helps with: A soft, bouncy cream finish rather than a flat powderFinger-blending for a natural, hand-painted flushBuildable color without the product setting too fast

In stock. Arrives in 3 to 7 business days

You’re $100.00 away from free US shipping.

30-day returns
Free US shipping on orders of $100 or more
Tracked delivery to your door

Verified authentic Shipping and returns

Inside the formula

Ingredients declared

No fragrance

on the list

How to use

Dot small amounts onto the apples of the cheeks with a fingertip, then blend outward and upward while it is still workable, before the custard-like set locks the placement in. Build with additional light dots rather than one large amount.

1 of 3

51 of 60 explained

Isododecane solvent: Isododecane is a light, volatile hydrocarbon. It carries pigments and film formers on smoothly and then evaporates, leaving the film behind and nothing oily.
Dimethicone silicone: Dimethicone is the most used cosmetic silicone. It forms a breathable film that smooths the surface, slows water leaving skin, and gives the slip that makes a primer or cream feel silky. It is inert and does not penetrate.
Silica absorbent: Silica is finely milled mineral, essentially very pure sand. It absorbs oil, stops powders clumping and soft-focuses the look of pores and fine lines.
Polymethylsilsesquioxane silicone: Polymethylsilsesquioxane is a silicone resin in fine sphere form. It soft-focuses the look of pores and lines and gives a smooth, powdery finish.
Disteardimonium Hectorite thickener: Disteardimonium Hectorite is a modified clay used to thicken the oil phase and stop pigments settling to the bottom of the bottle.
Methyl Trimethicone silicone: Methyl Trimethicone is a light, volatile silicone chosen for a notably dry finish. It thins a formula and disperses powders evenly.
C10-18 Triglycerides emollient: A blend of triglycerides in a soft, butter-like form. It melts near skin temperature, which is why it appears in balms and cleansing sherbets.
Isohexadecane emollient: Isohexadecane is a branched hydrocarbon emollient that spreads easily and leaves a dry finish. It is often paired with a thickener to build a gel-cream.
Mica colorant: Mica is a mineral ground into fine flakes. It scatters light, so it lightens a shade and gives the soft glow of a tinted or illuminating product.
Caprylyl Methicone silicone: Caprylyl Methicone is a silicone with a fatty tail, so it mixes with plant oils as well as with silicones. It gives a dry slip and helps disperse powders.
Diisostearyl Malate emollient: Diisostearyl Malate is a thick, glossy ester used to hold pigment in suspension and give a cushioned shine. It is the standard emollient in lip products.
Diphenylsiloxy Phenyl Trimethicone silicone: Diphenylsiloxy Phenyl Trimethicone is a high-shine silicone used where a formula needs gloss without stickiness.

39 more explained

Nelumbium Speciosum Flower Extract plant extract: Lotus flower extract, from the same sacred lotus as the leaf. It carries flavonoids and sugars and is used as a conditioning, hydrating extract.
Dimethicone Crosspolymer silicone: Dimethicone Crosspolymer is silicone linked into a soft, springy network. It soaks up oil, blurs the look of texture, and gives the velvety feel of a primer.
Cetyl PEG/PPG-10/1 Dimethicone silicone: A silicone emulsifier used to hold water inside an oil or silicone phase. It is the standard emulsifier in a cushion or a silicone-based primer.
Propylene Carbonate solvent: A polar solvent used mainly with clays: it swells montmorillonite and hectorite so they thicken an oil phase. It also thins heavy pigment pastes.
Polysilicone-11 silicone: A silicone elastomer used as a film former and thickener. It gives a formula a soft cushioned body and helps it cling.
Polyglyceryl-2 Triisostearate emulsifier: Polyglyceryl-2 Triisostearate is a water-in-oil emulsifier used in balms and rich creams, and a good pigment disperser.
Polyhydroxystearic Acid dispersant: A polymer of hydroxystearic acid whose whole job is keeping mineral powders and pigments evenly suspended in oil instead of settling or streaking.
Tribehenin emollient: Glycerin joined to three behenic acid chains, giving a soft wax-like ester. It thickens an oil phase and leaves a cushioned rather than slippery feel.
Ethylene/Propylene Copolymer thickener: A soft hydrocarbon polymer used to thicken oils into a gel and to keep a stick or balm from separating.
Lecithin emulsifier: Lecithin is a soy or sunflower-derived phospholipid, the same class of molecule cell membranes are built from. It emulsifies oil into water and is the basis of the liposomes formulators use to carry actives.
Triethoxycaprylylsilane silicone: Triethoxycaprylylsilane is a coating applied to mineral powders so they disperse evenly and resist water rather than clumping.
Ethylhexyl Palmitate emollient: Ethylhexyl Palmitate is a palm-derived ester used as a light emollient and a solvent for pigment. It gives a smooth, non-greasy slip.
Isopropyl Myristate emollient: Isopropyl Myristate is a light ester emollient that absorbs fast and helps other ingredients penetrate. It is known to be poorly suited to blemish-prone skin at higher levels.
Isostearic Acid fatty acid: Isostearic Acid is a branched fatty acid, so unlike stearic acid it stays liquid. It conditions and helps disperse pigments.
Polyglyceryl-3 Polyricinoleate emulsifier: Polyglyceryl-3 Polyricinoleate is a castor-derived emulsifier that lets a formula hold a high water content inside an oil or wax base.
Propanediol humectant: Propanediol is a plant-derived glycol used in place of propylene glycol. It hydrates, carries actives into solution, and gives a lighter, less sticky slip than glycerin at the same strength.
Water solvent: Water is the base almost every serum, toner and cream is built on. It dissolves the water-loving ingredients and sets how light the finished texture feels. On an INCI list it is usually first, which only means it is the largest single ingredient by weight.
Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate antioxidant: This is a stabiliser that keeps the oils and fragrance in a formula from oxidising. Its job is the shelf life of the product rather than any effect on skin.
Pentylene Glycol humectant: Pentylene Glycol hydrates and, like the other longer-chain glycols, makes a formula less hospitable to microbes so the preservative system can be lighter. It also improves how evenly a product spreads.
Butylene Glycol humectant: Butylene Glycol is a small glycol that does two jobs at once: it holds water in the top layer of skin and it dissolves plant extracts and actives that plain water cannot. It also thins a formula, which is why watery Korean essences lean on it.
Glycine amino acid: Glycine is the smallest amino acid and one of the free amino acids skin holds to keep water in the outer layer. In a formula it is a humectant and a mild buffer.
Serine amino acid: Serine is one of the most abundant free amino acids in the outer layer of skin, where it helps hold water. Added to a formula it is a humectant.
Glutamic Acid amino acid: Glutamic Acid is an amino acid used as a humectant and a mild pH adjuster. It is one of the components of skin's natural moisturising factor.
Aspartic Acid amino acid: Aspartic Acid is an amino acid used as a humectant and buffer, usually within a wider amino acid blend.
Leucine amino acid: Leucine is an essential amino acid used as a humectant, part of the amino acid block many Korean essences carry.
Alanine amino acid: Alanine is a free amino acid skin uses as part of its own moisture-holding system. In a formula it hydrates and conditions.
Lysine amino acid: Lysine is an essential amino acid used as a conditioning humectant in an amino acid complex.
Arginine amino acid: Arginine is an amino acid that does two jobs here: it holds water in the outer layer of skin, and it neutralises acidic gelling agents, which is why it often stands in for a synthetic pH adjuster.
Tyrosine amino acid: Tyrosine is an amino acid used as a conditioning humectant in amino acid complexes.
Phenylalanine amino acid: Phenylalanine is an essential amino acid used in skincare as a conditioning humectant.
Proline amino acid: Proline is an amino acid abundant in collagen and one of skin's own humectants. Added to a formula it holds water in the outer layer.
Threonine amino acid: Threonine is an essential amino acid used in skincare as a humectant, normally as part of an amino acid complex rather than alone.
Valine amino acid: Valine is an essential amino acid used as a humectant alongside the rest of an amino acid block.
Isoleucine amino acid: Isoleucine is an essential amino acid used as a conditioning humectant within an amino acid complex.
Histidine amino acid: Histidine is an amino acid used as a humectant and a buffer, part of skin's own free amino acid pool.
Cysteine amino acid: Cysteine is a sulphur-bearing amino acid used as a humectant and antioxidant. It is one of the three building blocks of glutathione.
Methionine amino acid: Methionine is a sulphur-bearing essential amino acid used as a humectant and mild antioxidant.
Dehydroacetic Acid preservative: A preservative that works best in acidic formulas and is almost always paired with benzyl alcohol. It is one of the standard systems in products built without parabens.
Iron Oxide Yellow colorant: Iron Oxides are mineral pigments in red, yellow and black, and the three are blended to make every skin-tone shade in a tinted product. They are inert and sit on the surface.

Worth knowing

Patch test on the inner wrist before first use if you have a known sensitivity to fragrance or dye.
Build a new shade gradually rather than all at once if you are unsure how it will look once it sets.

Complete the routine

This itemTIRTIR Custard-Like Liquid Blush 9g (6color)$27.50
Cleanse first, so the next step meets bare skinTIRTIR Milk Creamy Foam Cleanser 90g$42.50
The treatment step of this routineTIRTIR ICE-COOLING WATER DROP SERUM 30ml$57.50

Total for 3 items$127.50

Reviews

No reviews yet. Tell us how much you love the product!

Write a review

TIRTIR Custard-Like Liquid Blush 9g (6color)

How it felt, how your skin took it, what you layer it with. Straight answers help the next person choose.

Read every customer review

TIRTIR, Korean-market original

Sets soft, not flat.

Verify your unit when it arrives

Korean-market stock with the original barcode and batch code intact, exactly as it left Korea.

On the unit itself

The Korean-market barcode, unaltered from the retail package.
The manufacturer’s batch code, exactly as the maker printed it.

정품Genuine article, Korean-market stock

What professionals say

What skin-care professionals say about skin care, quoted from the medical sources linked beside each.

Your skin barrier is basically your outer layer of the skin.
Melissa Piliang, MDDermatologist, Cleveland Clinic
Pretty much every step of a Korean skin care routine is going to have some component of hydration.
Alok Vij, MDDermatologist, Cleveland Clinic