How is this different from the Red Cushion?

Same base technology, different delivery. The cushion metres out one dose per press for speed; the liquid format lets you control exactly how much goes where and build it up with a brush or sponge.

Can I build this to full coverage?

Yes, in thin layers pressed into the skin rather than one heavy coat. Building this way keeps the flexible, skin-like finish instead of it turning stiff or cakey. This is general guidance rather than a fixed rule, so adjust it based on how your own skin or the product itself responds.

Does it need setting powder?

Not everywhere. A light dusting only over the T-zone or other oil-prone areas is usually enough, since heavier powder across every part of the face tends to flatten the finish this liquid base is built to give.

Is this the same formula sold in Korea, or a version made for the US market?

This is TIRTIR's Korean-market formula, sourced and shipped with its original Korean-market packaging and batch coding rather than a separate US-reformulated version. Korean Pharmacy stocks the exact SKU sold through Korean retail rather than a substitute built for US shelves, which is the point of buying from a specialist rather than a general beauty retailer.

How should I store this to keep it in good condition?

Keep the cap or compact closed between uses and store it away from direct sunlight and heat, the same way you would any cosmetic. A cool, dry spot such as a drawer or cabinet keeps the texture and finish consistent for longer than leaving it exposed on a warm windowsill or in a hot car.

TIRTIR

Mask Fit Red Foundation 30ml (23color)

No reviews yet

color

$55.00

30 ml

$183.33 per 100 ml

Korean-market formula
Ships from California or direct from Korea
Korean barcode and batch code intact

Suited to: Normal to combination skin looking for a lightweight, second-skin baseOily or shine-prone skin that needs a breathable finish through the dayDry skin that wants a dewier finish than a flat matte base givesCombination skin with a T-zone that shines by midday

Helps with: Coverage needs beyond what a cushion press gives in one passSpot-building over redness or discolorationA base applied with a brush or sponge rather than a puff

In stock. Arrives in 3 to 7 business days

You’re $100.00 away from free US shipping.

30-day returns
Free US shipping on orders of $100 or more
Tracked delivery to your door

Verified authentic Shipping and returns

Inside the formula

Ingredients declared

#30

Fragrance on the list

How to use

Warm a small amount between the fingers or on a damp sponge, then press it into the skin rather than dragging it across, starting from the centre of the face and working outward. Build coverage with thin layers pressed in rather than one thick coat, and set with a light dusting of powder only where oil control is needed.

1 of 3

43 of 49 explained

Water solvent: Water is the base almost every serum, toner and cream is built on. It dissolves the water-loving ingredients and sets how light the finished texture feels. On an INCI list it is usually first, which only means it is the largest single ingredient by weight.
Cyclopentasiloxane silicone: Cyclopentasiloxane is a volatile silicone: it spreads a formula thin and smooth then evaporates, leaving no residue. It is the silicone behind a dry, powdery primer finish.
Trimethylsiloxysilicate silicone: A silicone resin supplied in a volatile carrier. The carrier flashes off and the resin stays behind as a light, transfer-resistant film.
Propanediol humectant: Propanediol is a plant-derived glycol used in place of propylene glycol. It hydrates, carries actives into solution, and gives a lighter, less sticky slip than glycerin at the same strength.
Dimethicone silicone: Dimethicone is the most used cosmetic silicone. It forms a breathable film that smooths the surface, slows water leaving skin, and gives the slip that makes a primer or cream feel silky. It is inert and does not penetrate.
Diphenylsiloxy Phenyl Trimethicone silicone: Diphenylsiloxy Phenyl Trimethicone is a high-shine silicone used where a formula needs gloss without stickiness.
Methyl Trimethicone silicone: Methyl Trimethicone is a light, volatile silicone chosen for a notably dry finish. It thins a formula and disperses powders evenly.
Niacinamide active: Niacinamide is vitamin B3, and it is the most studied active in Korean formulation. It is used at roughly 2 to 5 percent for the look of uneven tone and visible pores, and it is water soluble, stable and comfortable beside almost every other active, which is why it turns up in so many lists.
PEG-10 Dimethicone silicone: PEG-10 Dimethicone is a silicone with a water-loving chain attached, so it bridges the silicone and water phases. It is used as an emulsifier and to give a light, silky feel.
1,2-Hexanediol humectant: 1,2-Hexanediol is a glycol used for two reasons: it holds water like glycerin, and it makes a formula harder for microbes to live in, so less traditional preservative is needed. Korean formulas use it heavily for that second reason.
Polypropylsilsesquioxane silicone: A silicone resin that dries into a hard, water-resistant film. It is what makes a formula stay put through sweat instead of sliding.
Magnesium Sulfate mineral: Magnesium Sulfate is Epsom salt, used as a mineral salt in the water phase. Despite the name it is not a cleansing sulfate and does not foam.

31 more explained

Boron Nitride absorbent: A plate-like mineral powder with a notably slippery feel. It softens how light falls on skin and makes a powder or stick glide rather than drag.
Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone emulsifier: A silicone emulsifier with polyglycerin attached. It is the standard way to hold water inside a silicone fluid, which is how many mineral sun fluids are built.
C12-15 Alkyl Benzoate emollient: C12-15 Alkyl Benzoate is a light ester emollient and solvent. It gives a silky finish, dissolves pigments and UV filters, and mildly discourages microbial growth.
Disteardimonium Hectorite thickener: Disteardimonium Hectorite is a modified clay used to thicken the oil phase and stop pigments settling to the bottom of the bottle.
Iron Oxide Yellow colorant: Iron Oxides are mineral pigments in red, yellow and black, and the three are blended to make every skin-tone shade in a tinted product. They are inert and sit on the surface.
Isododecane solvent: Isododecane is a light, volatile hydrocarbon. It carries pigments and film formers on smoothly and then evaporates, leaving the film behind and nothing oily.
Octyldodecanol emollient: Octyldodecanol is a branched fatty alcohol used as an emollient and as a solvent for pigments and mineral powders. It thickens slightly and leaves a soft finish.
Aluminum Hydroxide absorbent: Aluminum Hydroxide is a mineral powder used to coat pigments so they disperse evenly, and to absorb a little oil. It is not an antiperspirant salt.
Polyhydroxystearic Acid dispersant: A polymer of hydroxystearic acid whose whole job is keeping mineral powders and pigments evenly suspended in oil instead of settling or streaking.
Stearic Acid fatty acid: Stearic Acid is a saturated fatty acid from plant fats, and one of the three lipid classes skin's own barrier is built from. In a formula it thickens, stabilises the emulsion and can be turned into a soap-style cleanser by adding a base.
Triethoxycaprylylsilane silicone: Triethoxycaprylylsilane is a coating applied to mineral powders so they disperse evenly and resist water rather than clumping.
Alumina absorbent: Alumina is aluminium oxide, a hard white mineral powder. It is used to coat pigments so they disperse evenly and, ground fine, as a mild polishing grain.
Potassium Sorbate preservative: Potassium Sorbate is a preservative that holds off yeast and mould in acidic formulas. It is almost always used with sodium benzoate, because neither covers the whole range of microbes alone.
Propylene Carbonate solvent: A polar solvent used mainly with clays: it swells montmorillonite and hectorite so they thicken an oil phase. It also thins heavy pigment pastes.
Fragrance fragrance: Fragrance, or Parfum, is a single declaration standing for a whole scent blend, which can be dozens of materials. Regulators allow it as a trade secret, so a list showing only this word does not say what the scent is made of. It is the most common trigger named by people with reactive skin.
Polyglyceryl-4 Isostearate emulsifier: Polyglyceryl-4 Isostearate is a water-in-oil emulsifier common in cleansing oils and balms.
Adenosine active: Adenosine is a nucleoside that Korea's own cosmetic authority recognises as a wrinkle-care functional ingredient, which is why it appears on so many Korean lists at a low level. It is used for the look of fine lines and is stable and well tolerated.
Trisodium Ethylenediamine Disuccinate chelator: A readily biodegradable chelator used in place of EDTA. It ties up trace metal ions in the water so they cannot spoil the formula.
Neopentyl Glycol Diethylhexanoate emollient: A light branched ester with a dry, powdery finish. It is used to thin heavier oils without adding shine.
Isopropyl Titanium Triisostearate dispersant: An ester used to coat mineral powders so they wet out in oil rather than clumping. It is a processing aid for pigments rather than an ingredient aimed at skin.
Polymethyl Methacrylate absorbent: Polymethyl Methacrylate is an acrylic polymer used as fine spheres. They give a smooth, powdery slip and blur the look of surface texture.
Haematococcus Pluvialis Oil antioxidant: An algae extract that is the main natural source of astaxanthin, the deep red carotenoid. It is used as a plant antioxidant and colours a formula orange-red.
Butylene Glycol humectant: Butylene Glycol is a small glycol that does two jobs at once: it holds water in the top layer of skin and it dissolves plant extracts and actives that plain water cannot. It also thins a formula, which is why watery Korean essences lean on it.
Glycerin humectant: Glycerin is the most used humectant in skincare. It draws water into the outer layer of skin and holds it there, and it is one of the very few ingredients whose hydrating effect is settled science rather than marketing. Higher amounts feel tacky, which is why it is usually blended.
Dipropylene Glycol humectant: Dipropylene Glycol is a glycol used as a solvent and a light humectant. Its main job is keeping the rest of the formula dissolved and the texture fluid rather than adding hydration of its own.
Sodium Palmitoyl Proline amino acid: The amino acid proline with a fatty tail attached, which lets it work at the boundary between oil and water. It conditions and helps hold an emulsion together.
Hibiscus Sabdariffa Flower Extract plant extract: Roselle hibiscus extract, deep red from anthocyanins and naturally acidic. It carries plant acids and is used as an antioxidant extract.
Astaxanthin antioxidant: Astaxanthin is a deep red antioxidant from microalgae, the pigment that makes salmon pink. It is oil soluble, colours a formula noticeably, and is used as an antioxidant.
Pancratium Maritimum Extract plant extract: Sea daffodil extract, from a bulb that survives on bare coastal sand. It is used as a conditioning extract for the look of uneven tone.
Nymphaea Alba Flower Extract plant extract: White water lily flower extract, carrying tannins and flavonoids. It is used as a conditioning floral extract.
Propolis Extract plant extract: Propolis is the resin bees collect from tree buds and use to seal the hive. It is rich in flavonoids, carries a warm amber colour and scent, and is used for the look of dull, stressed skin. It is a bee product, so it is worth knowing about if you react to those.

Worth knowing

Patch test a new shade along the jawline in daylight before committing to a full-size cushion or compact.
Skin with a known sensitivity to silicones or fragrance should check the full ingredient list before daily wear.
Reapply with a light press rather than a thick new layer, since building up too much product can settle into fine lines.

Complete the routine

This itemTIRTIR Mask Fit Red Foundation 30ml (23color)$55.00
Cleanse first, so the next step meets bare skinTIRTIR Milk Creamy Foam Cleanser 90g$42.50
The treatment step of this routineTIRTIR ICE-COOLING WATER DROP SERUM 30ml$57.50

Total for 3 items$155.00

Reviews

No reviews yet. Tell us how much you love the product!

Write a review

TIRTIR Mask Fit Red Foundation 30ml (23color)

How it felt, how your skin took it, what you layer it with. Straight answers help the next person choose.

Read every customer review

TIRTIR, Korean-market original

The Red Cushion formula, in liquid form.

Verify your unit when it arrives

Korean-market stock with the original barcode and batch code intact, exactly as it left Korea.

On the unit itself

The Korean-market barcode, unaltered from the retail package.
The manufacturer’s batch code, exactly as the maker printed it.

정품Genuine article, Korean-market stock

What professionals say

What skin-care professionals say about skin care, quoted from the medical sources linked beside each.

Your skin barrier is basically your outer layer of the skin.
Melissa Piliang, MDDermatologist, Cleveland Clinic
Pretty much every step of a Korean skin care routine is going to have some component of hydration.
Alok Vij, MDDermatologist, Cleveland Clinic